5 OFTEN ASKED QUESTIONS ABOUT INSTALLING FENCES

Installations of fences is one of the greatest methods to safeguard your property is to install a fence. In addition to improving security by restricting access for both humans and animals, fence constructions improve the aesthetics of the land. The cost of your project and the fence’s longevity will depend on how well you select a fencing firm.

Read More: fence installation cost per foot

But a badly built fence installation will significantly shorten its lifespan, usefulness, and durability. Fence deterioration may occur sooner if the post holes are not drilled deeply enough. The following are some of the most common queries regarding building fences:

1. Is a Fence Necessary?

Putting up a fence around your home gives you privacy and security from neighbors and onlookers. Fence installations may assist train climbing plants that beautify your property, which adds to their visual value when constructed correctly. For the following reasons, think about putting in a fence:

It works wonders at discouraging trespassers, invaders, and wild animals.

It shields your kids from the traffic.

It may raise the value of your house.

The installation of electrical fence becomes simple.

It makes the borders of your property very obvious.

After installing a fence to safeguard your property, you may turn your house into a calm sanctuary where your children can play in safety. This kind of confinement is essential because it allows you to monitor them while keeping outsiders out.

2. What Is the Price of Fencing?

The kind and layout of your fence installations will determine how much it will cost in total. Building a split rail wood fence is very simple and affordable. Selecting two rails as opposed to three might potentially result in more financial savings.

Your fence’s price will be determined by:

The whole length and height since each linear foot is priced individually

The kind of material used for fence

Slope (grading is necessary due to steep characteristics)

The design and style (installing basic fences is less expensive)

There will be an effect from the posts’ separation as well. Although you may raise the spacing to 15 feet to save money, most posts are spaced 8 to 12 feet apart.

3. What Is the Most Affordable Material for Fencing?

Compared to other fence solutions that offer the same advantages in terms of strength and visibility, chain link fencing is far less expensive. Precast concrete poles are strong, low maintenance, and visually appealing; they hold chain link fence. These weather-resistant poles come in a variety of styles to meet your needs, regardless of height.

You must spend money on the best anti-termite treatment if you want to use timber poles. Apply motor oil to prevent moisture and soak the posts in a copper naphthenate solution to ward off termites.

Installing fence posts at the appropriate depth is the best method to extend their lifespan. If you are creating a 2000mm high fence, a normal 200mm-wide post has to sit in a 600mm deep hole. For the following reasons, chain link fence is preferred by most homeowners:

Economy of scale

Installing quickly

Sturdiness

Simpleness of upkeep and repairs

Tension wire must be installed in order to support the lower portion of your fence. Because the tension wire keeps the fence installations from drooping or becoming loose over time, longevity is greatly increased. A ground wire is necessary if you intend to build an electric fence in order to shield the residents from electrical shocks.

4. What Is the Strongest Material for Fencing?

Masonry wall fence is not prone to structural problems and can endure for over a century. Whether you choose stucco, brick, or stone, all you’ll need is a little TLC to bring it back to its former glory. You need to use columns to strengthen your masonry wall for optimal results.

A structural engineer is required to offer the required seismic resistance in accordance with the rules if you are building in an earthquake-prone area. Even if you don’t want to paint your wall, make sure the materials you choose look good.

When building a stone fence, follow these steps:

Dig a ditch that is six inches deep and mark the wall’s path.

After adding 4′′ of gravel, compact it to 2′′.

Build columns and footings.

As you go, backfill and install stones.

The overstressed units in masonry stone walls may shift or break, among other difficulties. The best defense against this issue is the installation of expansion joints.

These connections prevent cracks from arising from temperature changes, settling, elastic deformation, and moisture expansion. They also divide the fence installations into segments. Your expansion joints should be spaced around ten feet apart. Installing the joints at the midpoint between two posts is an alternative.

5. What Is the Project’s Timeline?

The materials you choose, the layout of the fence, and the underlying site conditions will all affect how long it takes to finish your fencing project. You would have to invest extra time and money if you come across stones when excavating the trenches. However, you can’t afford to cut corners when it comes to the excavation process if stability and longevity are your goals.

For optimal stability, the posts must be fastened into the ground. It would be better to take longer than to have a barrier that isn’t adequately strengthened. If speed is of the essence, though, you can expedite the fencing procedure by:

Putting up precast concrete blocks

Automating the process of grading

selecting a vinyl fence, which takes around three days

Digging the poles using an auger

Erecting a boundary wall is assured to be quick and easy with precast concrete blocks. They may be used to expedite the building process considerably. Since the blocks are not load bearing, it is possible to ensure speedy construction on site by molding and curing them in a controlled environment.

According to the blueprints, the fence business would combine many blocks using bolted connectors. When it comes to giving you the necessary structural solidity, welded connections are equally efficient.

You must install the steel bolts in your poured concrete foundation after excavating the trench. Put the concrete blocks on the dowels that extend from the foundation after letting the poured concrete dry for at least 22 days.